Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Hinges on a 2019 Mercedes Sprinter

Model: Mercedes Sprinter Br907, Br910, MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Body

See other generations:
Video tutorial

Learn how to change the rear hinges on the MK3 version of the Mercedes Sprinter. This task requires two people, as you will need assistance to hold the door.

Start with the top hinge. Mark the position of the hinge so you know where to reattach it later.

You will need a 17mm spanner, a Torx T4 and T5, and a star screwdriver. Begin by loosening the lower nuts while someone holds the door.

Fit the new hinge with the smaller side towards the door: you have marked the hinge positions, so you can reinsert them easily. Initially, tighten the screws by hand; you will tighten them fully later.

Close the door to ensure it is properly aligned. If everything is okay, securely tighten the outer screws, then open and close the inner ones.

Repeat the same process for the upper hinge and the other door.


Updated on 26 August 2026 by ScegliAuto


Related tutorials

How to Adjust the Front Door of the Mercedes Sprinter
How to Adjust the Front Door of the Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) The instructions in this guide will show you how to adjust the front door of the Mercedes Sprinter. First, open the front door of the vehicle and sta…
How to change the language on the Mercedes Sprinter
How to change the language on the Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) Let's see how to change the language on a Mercedes Sprinter: turn on the ignition without starting the engine, press the "menu" button repeatedly unt…
Removing the Rear Seats of the Mercedes Sprinter
Removing the Rear Seats of the Mercedes Sprinter
Mercedes Sprinter (2018-2026 / Br907, Br910, MK 3) In this brief guide, you will find instructions to remove and replace the rear seats of the Mercedes Sprinter in simple steps. First, open the slidin…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos