Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing a Car Door Panel

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Door trim panel

There are many tasks you can perform on your car without needing a professional's help. After opening the door and completely emptying the storage compartment, locate the three screws on the panel and remove them with a magnetic screwdriver. Next, detach the aluminum trim of the door, but be very careful, as this is an extremely delicate part. Remove the two screws and move to the bottom of the panel, where you'll perform the last step before removing the structure. Underneath, you will notice a support screw located roughly in the center of the panel; remove it and proceed to detach the entire assembly.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on a Mercedes E-Class
How to Remove the Door Panel on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) Replace the door panel on your Mercedes E-Class if it is irreparably damaged and cannot be repaired. Use a plastic trim tool to pry off the cover und…
How to Remove the Door Panel of the Mercedes E-Class
How to Remove the Door Panel of the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) Today, learn how to remove the door panel of a Mercedes E-Class model W 212. To remove the door panel, open the front door that needs disassembly. Us…
How to Remove the Panel on a Mercedes E-Class
How to Remove the Panel on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) Remove the door trim panel on the E-Class? Follow this guide to take off the panel. Use a trim tool to pry off the plastic cover under the door handl…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos