Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Center Dashboard Panel of the Mercedes A-Class?

Model: Mercedes Classe A W168 - Years 1997-2004
Part: Dashboard

To remove the center dashboard panel of the Mercedes A-Class, use a tool to pry it loose so you can pull the radio out of its housing. Once the radio is removed, disconnect the connectors at the back to completely take it out. Then, use a tool to pry off the panel and disconnect the underlying connectors. This will allow you to insert the new panel into its place, securing it properly and then reinstalling the previously removed radio.

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Radio from a Mercedes C-Class
Removing the Radio from a Mercedes C-Class
Mercedes Classe A (2012-2018 / W176) .. Let's remove the radio from a Mercedes C-Class. Start by removing the trim panel above the center console using a pry tool (where the mounting.. …
How to Remove the Center Console from the Mercedes A-Class?
How to Remove the Center Console from the Mercedes A-Class?
Mercedes Classe A (2018-2026 / W177) .. To remove the center console from the Mercedes A-Class, use a tool like a screwdriver to pry off the trim panel located at the front and rear ends of.. …
How to Remove and Replace the Center Tunnel on a Mercedes A-Class
How to Remove and Replace the Center Tunnel on a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. and replace the center tunnel on a Mercedes A-Class. Use a plastic trim tool to pry off the cover located at the bottom of the center tunnel. Remove.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos