Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Where is the battery located in the Mercedes M-Class?

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W166 - Years 2011-2018
Part: Battery
Operation: Where is the battery located in the Mercedes M-Class?

In this video, we can see where the battery is located in the Mercedes M-Class and how to proceed in case we need to replace it. As shown, the battery is not positioned in the traditional engine compartment, but rather inside the passenger cabin, below the passenger seat. To access it and subsequently replace it, make sure that the key is not inserted, then move the seat completely forward and open the door located below it. Disconnect the terminals starting with the negative one, unscrew the fixing bolt with a 13mm wrench, and remove the battery from its housing. To install the replacement, simply follow the reverse procedure.


Posted on 22 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe M 2005-2011 - Where is the auxiliary battery located in the Mercedes ML 350? Read Answer
    • Classe M 2011-2018 - How much does the auxiliary battery for the Mercedes ML350 W166 cost? Read Answer
    • Classe M 2005-2011 - Where is the battery located in the Mercedes Ml 320 CDI? Read Answer
    • Classe M 2011-2018 - Where is the battery located in the Mercedes M-Class? Read Answer
    • Classe M 2005-2011 - Where is the battery of the Mercedes M-Class W164? Read Answer
    • Classe M 2005-2011 - Where is the battery of the Mercedes ML320? Read Answer
    • Classe M 2011-2018 - Where is the auxiliary battery of the Mercedes M-Class located? Read Answer
    • Classe M 1997-2005 - How long does the battery last in the Mercedes M-Class? Read Answer
    • Classe M 2005-2011 - Where is the battery of the Mercedes ML W164? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos