Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Power Steering Fluid Reservoir on a Mercedes ML 350?

Model: Mercedes Classe M W164 - Years 2005-2011
Part: Checks and maintenance

In this video, you can see where the power steering fluid reservoir is located on the Mercedes M-Class, useful if you need to replace it or top it up. As shown, it is located at the front left of the engine, in front of the radiator. To access it for removal, you must first remove the engine cover and then the intake duct from the filter box. To top it up, simply unscrew the large top cap and add the necessary amount of fluid to reach the ideal level.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Restoring Power Steering Oil Level
Restoring Power Steering Oil Level
Mercedes Classe M (1997-2005 / W163) Whenever you perform maintenance on the power steering that may involve the pump or the steering box, restore the oil level in the circuit to avoid a…
Replacing the Radiator Expansion Tank
Replacing the Radiator Expansion Tank
Mercedes Classe M (1997-2005 / W163) If you need to replace the coolant expansion tank, make sure to proceed only after the engine has completely cooled down. Start by draining the coola…
Check for Coolant Leaks
Check for Coolant Leaks
Mercedes Classe M (1997-2005 / W163) If the coolant level warning light on the dashboard illuminates, check the level in the respective reservoir. Once you open the front bonnet, the coo…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos