Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing Rear Brake Shoes

Model: Mercedes Classe S W140, MK 3 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
Part: Brake drums and shoes

See other generations:
Video tutorial

To replace the rear brake shoes, proceed as follows: lift the vehicle and remove the rear wheel. Then, unscrew the mounting pins of the caliper and its bracket to remove it along with the pads.

Next, unscrew the mounting screw of the drum (which also acts as a disc) and remove it from its seat to access the shoes. Release the retaining springs of the shoes, the support pins, and remove them.

Then, install the new shoes by reconnecting the springs and resetting the parking brake adjustment before proceeding in reverse for reassembly.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Replacing Battery in Mercedes S-Class
Replacing Battery in Mercedes S-Class
Mercedes Classe S (2005-2013 / W221, MK 5) On the Mercedes S-Class W221, the battery is not located under the hood, but in the compartment behind the rear seats. Access it from the trunk, so l…
Replacing Rear Brake Discs and Pads
Replacing Rear Brake Discs and Pads
Mercedes Classe S (1991-1998 / W140, MK 3) Lift the vehicle on a hydraulic lift and remove the rear wheel. Using a suitable punch, first remove the upper retaining pin of the brake pads, then …
How to replace the roof lining of the Mercedes S-Class
How to replace the roof lining of the Mercedes S-Class
Mercedes Classe S (1999-2005 / MK 4, W220) Today we will explain how to replace the roof lining of the Mercedes S-Class by yourself. We open the front doors of the car and lower the front and …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos