Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to unlock the automatic transmission in the Mercedes C-Class?

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Gearbox
Operation: How to unlock the automatic transmission in the Mercedes C-Class?

In this tutorial, we can see how to unlock the automatic transmission in the Mercedes C-Class, a very simple operation to be performed in case of emergency in order to put the car in neutral. First of all, detach the gearshift knob from the base of the center console, then locate the yellow button located just behind the gear lever. Once this is done, press and hold the button while simultaneously moving the lever to the "N" position. Make sure to engage the parking brake, of course, otherwise the car could move if the ground is not perfectly level.


Posted on 6 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2007-2013 - What is the problem with the automatic transmission of the Mercedes C-Class 220? Read Answer
    • Classe C 2007-2013 - What problems does the Mercedes C220 Class have? Read Answer
    • Classe C 2007-2013 - What to do if you have problems with your Mercedes C-Class W204 automatic gearbox? Read Answer
    • Classe C 2000-2007 - What to do in case of problems with the automatic transmission of the Mercedes C-Class W203? Read Answer
    • Classe C 2007-2013 - How to unlock the automatic gear lever of the Mercedes C-Class? Read Answer
    • Classe C 2007-2013 - What problems does the automatic transmission of the Mercedes C-Class have? Read Answer
    • Classe C 2000-2007 - How to perform automatic gearbox rest of the Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos