Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe E
  6. : How to disassemble the driver's seat in the Mercedes E-Class?

Mercedes Classe E - Video tutorial

Model: Mercedes Classe E W212 - Years 2009-2016
Part: Seat
Operation: How to disassemble the driver's seat in the Mercedes E-Class?

In this tutorial, we can see how to remove the driver's seat in the Mercedes E-Class, an extremely simple and fast operation. First, we move the seat all the way back, then we locate the two front bolts of the brackets and unscrew them using a 10mm 12-point socket wrench. Next, we move the seat forward and repeat the operation on the remaining two bolts. Finally, we open the engine hood, disconnect both battery terminals, and proceed to disconnect the wiring located underneath the seat. At this point, we can remove the seat from the cabin and install the replacement if necessary.


Posted on 13 December 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos