Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Trunk Opening Issue

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

See other generations:
Video tutorial

You may experience a problem with the trunk opening on your car. Try removing the inner cover of the hatch and check for any issues, possibly with the wiring. In the upper left, you should find a black cable sheath that needs to be pulled.

You might notice that the wires are worn, and if the wires are too short, they may not allow the trunk to open fully. Cold weather can also affect this, as it stiffens the sheath, risking the wires breaking.

Cut the wires where they are damaged and rewire them to the trunk.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Starting Problem Due to Fuel Pump Malfunction
Starting Problem Due to Fuel Pump Malfunction
Mercedes Classe E (2002-2009 / W211) You may suddenly find yourself stranded with your car, and the issue could be due to the fuel pump. Usually, the pump gives early signs that can aler…
Car Starting Problem
Car Starting Problem
Mercedes Classe E (2002-2009 / W211) If the engine does not turn over, or you only hear a click when you turn the ignition key and the dashboard lights dim, it is likely that the starter…
Fuse Removal on Mercedes E-Class
Fuse Removal on Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) Let's see how to remove the fuses on a Mercedes E-Class. Lift the trunk lid and locate the access panel on the right side. Remove the cover in the tr…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos