Do it yourself
| ||||
|
Mercedes Classe E - Video tutorial
Model: Mercedes Classe E
W211
- Years 2002-2009 If the engine does not move, or there is only a clicking sound as you turn the ignition key and the ignition warning lights dim, it is likely that the starter motor is stuck in the flywheel. In this case, shift into gear and push the car forward and backward, or use a wrench to spin the motor shaft. It could also be a problem with the battery which in this case should be recharged or even replaced. If the moped runs the engine normally but it does not start, the spark plugs are likely to be weak. In this case, the breaker contacts will have to be replaced or adjusted.
Posted on 15 September 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to replace the Ford Transit key batteryBelow I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.123
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |