Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Disassembly of the radio, center console, air vents

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Car stereo
Operation: Disassembly of the radio, center console, air vents

Remove the gearbox cover and its plastic panel by levering the edges with the aid of a plastic tool. Unhook the wiring from the switches and slide the frame off the gear lever by removing the knob. Unscrew the ashtray screws and remove it by disconnecting the connector. Unscrew all the screws of the climate control frame and remove it by disconnecting the connector. Unscrew all the screws of the car radio dashboard frame including two screws accessible from the slots of the air vents. Use a light source to locate them. For convenience, remove the vents. Gently remove the radio control frame by levering on all sides and then remove the complete dashboard as well by gently extracting it from its housing. Remove all the wiring on the back of the same until it is completely extracted.


Posted on 24 June 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2007-2013 - What problems can there be on the car radio of the Mercedes C220 CDI? Read Answer
    • Classe C 2007-2013 - What problems with the car radio of the Mercedes C-Class? Read Answer
    • Classe C 2000-2007 - Car radio fuse on Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos