Do it yourself
Frequently asked questions about cars and motorcycles

Instructions for Removing the Car Radio

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Car stereo

See other generations:
Video tutorial

Removing the original car radio requires taking off the entire trim of the center console and tunnel. Start by removing the air vents: use a screwdriver to pry them out further so you can access the mounting screws (two on top and two on the bottom).

Next, detach the trim around the gear shift and the one around the car radio and climate control by removing the ashtray container. At this point, you can access the mounting screws of the car radio and then pull it out from its slot by pulling it forward and disconnecting the corresponding connectors.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2000-2007 / W203) Removing the original car radio requires taking out other elements of the center console: start by prying off the air vents using a flathead screwdri…
Mercedes Classe C (2000-2007 / W203) How to remove the radio from a Mercedes C-Class? Let's see how to take off the trim pieces to extract the radio. Remove the shift knob trim using a p…
Mercedes Classe C (1993-2000 / W202) The electric opening and closing system of the car radio antenna was a must for many manufacturers during the late 80s and 90s: essentially, when the…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos