Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Disassembly of the C-Class radio

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Car stereo
Operation: Disassembly of the C-Class radio

Removing the car radio on Mercedes C-Class? Let's see how the plastics are disassembled to extract the car radio. We disassemble the trim frame of the gear knob with a plastic lever. We remove the air vents at the top of the car radio, we pull the ashtray out from underneath. Once the stereo no longer has plastic coating, let's unscrew the tightening screws on the sides of the stereo with a screwdriver. We take out the stereo with our hands and disconnect the cables (power and antenna). We choose the new car radio and connect the electrical terminals. We assemble the car stereo with all the mounting parts.


Posted on 18 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2007-2013 - What problems can there be on the car radio of the Mercedes C220 CDI? Read Answer
    • Classe C 2007-2013 - What problems with the car radio of the Mercedes C-Class? Read Answer
    • Classe C 2000-2007 - Car radio fuse on Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos