Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Mercedes A-Class

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Cabin air filter

See other generations:
Video tutorial

Replacing the cabin air filter on a Mercedes A-Class model W169 requires simple and brief steps. The first step is to open the hood.

The second step is to remove the air filter cover by taking out the two securing pins. The third step is to press the pins located on the sides of the air filter to remove it. The fourth step is to take out the air filter and then clean the filter housing.

The fifth step is to insert the new filter. The sixth step is to close the cover and insert the pins.

Finally, close the hood.


Updated on 9 September 2026 by ScegliAuto


Related tutorials

Replace Cabin Air Filter on Mercedes A-Class
Replace Cabin Air Filter on Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. to remove the cabin air filter from a Mercedes A-Class. Lift the hood, disconnect the cover located at the top of the compartment (under the windshield)... …
Replace the Cabin Air Filter on a Mercedes A-Class.
Replace the Cabin Air Filter on a Mercedes A-Class.
Mercedes Classe A (1997-2004 / W168) .. To replace the cabin air filter on a Mercedes A-Class, the first step is to purchase a new pollen filter. Next, get inside the vehicle, turn off the.. …
How to Replace the Cabin Air Filter in a Mercedes A-Class?
How to Replace the Cabin Air Filter in a Mercedes A-Class?
Mercedes Classe A (2004-2012 / W169) .. To replace the cabin air filter in a Mercedes A-Class, open the hood and locate the filter compartment at the base of the windshield on the passenger.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos