Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the License Plate Light Bulb

Model: Mercedes Classe E W211 - Years 2002-2009
Part: License plate light

Replacing the license plate light bulb (which is of the bulb type) is done very quickly: open the trunk and lift it enough to access the lamp holder that houses the bulbs; then unscrew the two screws securing the small light fixture located just below the chrome strip at the center of the trunk; the fixture will come off, and inside you will find the bulb; remove the old bulb, check that the metal tabs are not oxidized, and insert a new bulb before reassembling the fixture.

Updated on 22 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Mercedes Classe E (2002-2009 / W211) Removing the license plate light bulbs? Remove the rear light assembly and replace the damaged bulbs. Open and lift the trunk lid, then unscrew the s…
Mercedes Classe E (2009-2016 / W212) Today's guide provides the main instructions for replacing the timing chain on the Mercedes E-Class; the manufacturer recommends replacing the timing…
Mercedes Classe E (2009-2016 / W212) This video shows how to remove and replace the engine air filter in the Mercedes E-Class 250, specifically the W212 model produced between 2009 and 2…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos