Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace License Plate Lights on Mercedes E-Class

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: License plate light

See other generations:
Video tutorial

Removing the license plate light bulbs? Remove the rear light assembly and replace the damaged bulbs. Open and lift the trunk lid, then unscrew the securing screws above the light assembly.

Remove the light assembly from the rear trunk. Disconnect the power connectors attached to the light and pull it out of its housing.

Install the new bulbs in place of the damaged ones (replace the assembly if damaged). Secure the light assembly in the trunk and tighten the screws.

Test the operation of the license plate lights. Remove the trunk liner to perform maintenance inside.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How to Remove the Interior Light Fixture on a Mercedes E-Class W211
How to Remove the Interior Light Fixture on a Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) .. the interior light fixture on a Mercedes Benz E-Class W211, fourth generation. First, get inside the car and use a thin tool to pry off the various plastic.. …
How do you replace the light switch of the Mercedes E-Class?
How do you replace the light switch of the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. to replace the light switch of the Mercedes E-Class, you need to open the driver's door so that you can detach the side panel of the dashboard located.. …
How to Replace the Interior Light Bulb in a Mercedes E-Class?
How to Replace the Interior Light Bulb in a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. replace the interior light bulb in a Mercedes E-Class, use a tool like a screwdriver to pry the light fixture from its housing. Once it is removed, disconnect.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos