Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the light switch of the Mercedes E-Class?

Model: Mercedes Classe E W212 - Years 2009-2016
Part: Checks and maintenance

In order to replace the light switch of the Mercedes E-Class, you need to open the driver's door so that you can detach the side panel of the dashboard located in this position. Once this panel is removed, you can push the light switch from the inside, allowing you to disconnect the corresponding connector. Once the connector is disconnected, you can remove the old switch completely and connect the new one to the connector. After connecting the switch, you will need to insert it into its slot and reinstall the side panel of the dashboard.

Posted on 20 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Turn Signal Switch Replacement on Mercedes E-Class 320 W211
Turn Signal Switch Replacement on Mercedes E-Class 320 W211
Mercedes Classe E (2002-2009 / W211) .. remove the turn signal switch from a Mercedes E-Class 320 W211, third series. First, get inside the vehicle and remove the plastic trim around the turn.. …
How to replace the brake light switch of the Mercedes E-Class.
How to replace the brake light switch of the Mercedes E-Class.
Mercedes Classe E (2002-2009 / W211) .. replace the stop light switch of the Mercedes E-Class. First, let's get inside the vehicle on the driver's side and start by removing the plastic cover.. …
How to Remove the Turn Signal Switch on a Mercedes E-Class
How to Remove the Turn Signal Switch on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. to remove the turn signal switch on a Mercedes E-Class? Let's see how to proceed with the disassembly. Before removing the car's steering wheel, disconnect.. …

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos