Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Maintenance on a Mercedes C-Class C200

Model: Mercedes Classe C W205 - Years 2014-2021
Part: Warning light – error code

This brief tutorial shows you how to reset the maintenance light on a Mercedes C-Class, model C200, produced from 2014 to 2021. Start by turning the ignition to the first position. Next, display the screen that shows the total mileage of the vehicle. Then, press the black selection button and the "back" button simultaneously to open the service menu. After that, select "ASSYST PLUS" and turn the ignition to the second position. Finally, click on "full maintenance" and then on "confirm maintenance."

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Brake Pads on a Mercedes C200
How to Replace Brake Pads on a Mercedes C200
Mercedes Classe C (2007-2013 / W204) Follow the tutorial video available here to learn how to replace the brake pads on a Mercedes C200. Lift the vehicle and remove the tires one at a ti…
Where are the fuse boxes located in the Mercedes Benz C200 Compressor?
Where are the fuse boxes located in the Mercedes Benz C200 Compressor?
Mercedes Classe C (2007-2013 / W204) The fuse boxes play a very important function inside the car, as they protect the connected utilities from overloads, such as the radio, the cigarett…
How to Reset the Service Light on the Mercedes C200 W203
How to Reset the Service Light on the Mercedes C200 W203
Mercedes Classe C (2000-2007 / W203) To reset the service light on the Mercedes C200 W203, start by turning on the ignition without starting the engine. Press the button to the left of t…

    Frequently Asked Questions

    • Classe C 2000-2007 - Why did the "SRS" warning light come on in the Mercedes C-Class? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos