Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Mercedes Sprinter?

Model: Mercedes Sprinter MK 2, W906 - Years 2006-2018
Part: Door trim panel

To remove the door panel of the Mercedes Sprinter, turn the two clips located at the bottom of the door to completely detach the lower part of the panel. Once this is removed, loosen all the screws that were previously covered by it; at this point, detach the trim of the grab handle and loosen all the screws underneath, including those on the right side of the panel. Now you can remove the panel and insert the new replacement part, securing it properly with screws and clips.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Door Panel of a Mercedes Sprinter
Removing the Door Panel of a Mercedes Sprinter
Mercedes Sprinter (1995-2006 / MK 1, W901) In this video, see how to remove the front door panel of a Mercedes Sprinter in simple steps. First, open the door and remove the lower plastic cover…
How to Replace Speakers on 2018 Mercedes Sprinter
How to Replace Speakers on 2018 Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) In this video, we will see how to remove and replace the speakers on a 2018 Mercedes Sprinter, following these simple instructions. First, open the f…
How to Adjust the Front Door of the Mercedes Sprinter
How to Adjust the Front Door of the Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) The instructions in this guide will show you how to adjust the front door of the Mercedes Sprinter. First, open the front door of the vehicle and sta…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos