Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery in the Mercedes C-Class

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Battery

Today, you will learn how to independently replace the battery in the Mercedes C-Class. The battery in this car model is located in the trunk, specifically under the cover panel along with the jack and spare tire. To remove it from its housing, first remove the cover and then the center plate using a 6 mm wrench. Next, disconnect the connector and then the terminals, first the negative and then the positive, remove the nut that secures it, and take it out. Insert a new battery, connect the positive and negative terminals first, then the connector, and finally the nut.

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe C (2014-2021 / W205) .. and replace the battery on the Mercedes-Benz C-Class 200. First, open the hood of the vehicle and disconnect both battery terminals (positive and negative);.. …
Mercedes Classe C (2014-2021 / W205) .. and replace the battery in the Mercedes-Benz C-Class. First, open the hood and remove the plastic cover on the side, then take off the battery cover... …
Mercedes Classe C (2007-2013 / W204) .. and replace the battery in a Mercedes-Benz C-Class. First, open the hood of your vehicle and start by removing the plastic cover located at the top.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Classe C 2007-2013 - Where is the auxiliary battery of a Mercedes C-Class located? Read answer
    • Classe C 2000-2007 - Where is the secondary battery of the Mercedes Benz W203 located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos