Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove a single seat from a Mercedes Vito to accommodate a wheelchair.

Model: Mercedes Vito MK 3, W447 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Seat

See other generations:
Video tutorial

In this video, see how to remove a single seat from a Mercedes Vito to make space for a wheelchair. This is the seat located at the sliding door opening.

First, push the front passenger seat all the way forward to maximise space inside the vehicle. Return to the single seat: remove the locks, then the headrest, and push the backrest forward.

There are two levers at the back to lift it, and further forward, two levers that allow it to detach from the floor. With both hands, lift it out of the vehicle.

To refit it, ensure the hook underneath aligns with the first rail on the floor; then bring it back inside, place it in the correct position, push down the two levers, replace the seat, lift the backrest, and reattach the headrest. Job done.


Updated on 16 September 2026 by ScegliAuto


Related tutorials

How to Remove the Seat from a Mercedes Vito
How to Remove the Seat from a Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) The Mercedes Vito is a van designed for transporting people, offering ample space and comfort. Sometimes, it is necessary to remove a seat to increas…
Positioning and fuse diagram of the Mercedes Vito
Positioning and fuse diagram of the Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) In this short guide, we will look at the information needed to access the fuse boxes of the Mercedes Vito and Viano, including the fuse diagram and l…
How to remove the rear seat of the Mercedes Vito
How to remove the rear seat of the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) In this video, we will see how to remove the rear bench seat of a Mercedes Vito: first, we fold down the backrest using the outer levers, then pull t…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos