Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the EBD on a Mercedes B-Class?

Model: Mercedes Classe B MK 2, W246 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Warning light – error code

See other generations:
Video tutorial

To reset the EBD (Electronic Brakeforce Distribution) on a Mercedes B-Class, connect a diagnostic tool to the vehicle's OBD port: this port is located in the dashboard area immediately below the steering column. Once the scanner is connected, select the car model in question and its corresponding version: then follow the instructions in the tutorial to completely restore the EBD system.

At the end of the process, disconnect the scanner to verify the system reset.


Updated on 18 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Mercedes-Benz B-Class?
How to Reset the Service Light on the Mercedes-Benz B-Class?
Mercedes Classe B (2005-2011 / MK 1, W245) .. reset the service light on the Mercedes-Benz B-Class, turn on the ignition by rotating the key in the ignition switch. Once the dashboard is lit up,.. …
How do you reset the Service light on the Mercedes Class B?
How do you reset the Service light on the Mercedes Class B?
Mercedes Classe B (2005-2011 / MK 1, W245) .. On the instrument panel of the Mercedes B-Class, it will be possible to completely remove the Service light by turning on the instrument panel,.. …
How to deactivate the airbag light on the Mercedes B-Class
How to deactivate the airbag light on the Mercedes B-Class
Mercedes Classe B (2011-2019 / MK 2, W246) .. indicator light of the airbag in the Mercedes Class B. In order to reset the airbag indicator light, it is necessary to use a specific diagnostic software.. …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos