Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Light and Rain Sensor from the Mercedes C-Class

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Accessory kit

Tasks that can save you money and time are those involving sensors and small tools that do not require extensive knowledge for replacement. In this brief tutorial, you will learn how to do it yourself. The sensor in question is located under the plastic panel at the base of the rearview mirror. Use a plastic tool to avoid damaging the windshield and pry to remove the cover. You can disconnect the sensor from the connector and remove the clips that hold the sensor cover. Once the sensor block is removed, there will not be much left at the base of the mirror, so you can reassemble everything by following the steps in reverse.

Updated on 23 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Engine Speed Sensor on a Mercedes C-Class
How to Replace the Engine Speed Sensor on a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. replace the engine speed sensor on a Mercedes C-Class. Open the hood, lift it, and secure it. Remove the plastic soundproofing panel, then disconnect.. …
How to Replace the Outside Temperature Sensor on a Mercedes C-Class?
How to Replace the Outside Temperature Sensor on a Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. the outside temperature sensor on a Mercedes C-Class, open the hood and loosen the bolts that secure the grille at the front of the engine compartment... …
How to Remove the Multifunction Camera on the Mercedes
How to Remove the Multifunction Camera on the Mercedes
Mercedes Classe C (2014-2021 / W205) .. multifunction camera located on the Mercedes C-Class W205: this operation should be done with the vehicle turned off, by removing the cover of the rain.. …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos