Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the License Plate Light Bulbs on a Mercedes-Benz C-Class?

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: License plate light

See other generations:
Video tutorial

In this tutorial, you will see how to replace the license plate light bulbs on a Mercedes-Benz C-Class, a very simple and quick operation. First, ensure the key is not in the ignition, then open the trunk.

Locate the indicated screws and remove them with a T15 Torx wrench. Next, remove the plastic rivets, separate the panel from the trunk, and extract the old bulb from the socket.

At this point, simply insert the replacement bulb, repeat the process on the opposite side if necessary, and follow the reverse procedure.


Updated on 21 September 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) .. To replace the license plate bulb on a Mercedes-Benz C-Class, loosen the screws located next to the two light assemblies containing the license plate.. …
Mercedes Classe C (2000-2007 / W203) How to replace the license plate bulbs on a Mercedes C? Here’s how to remove the light assembly and change the bulbs. Remove the securing screws on t…
Mercedes Classe C (2007-2013 / W204) .. replace the license plate bulbs on a Mercedes C-Class. First, open the trunk and start unscrewing the screws of the plastic cover for the lights; then.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos