Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the License Plate Bulb on a Mercedes-Benz C-Class?

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: License plate light

See other generations:
Video tutorial

To replace the license plate bulb on a Mercedes-Benz C-Class, loosen the screws located next to the two light assemblies containing the license plate bulbs. Next, open the trunk and unscrew the screws securing the inner panel with the carpet to remove it. This will provide access to the screws holding the light assembly from the inside: at this point, it can be removed and disconnected from the connector, pulling out the bulb inside.

After removal, insert the new bulb and reassemble all previously removed parts.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

License Plate Bulb Replacement on Mercedes C-Class
License Plate Bulb Replacement on Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. replace the license plate light on a Mercedes C-Class, first lift the trunk lid and remove the four T20 Torx screws. Next, detach the various retaining.. …
Replacing License Plate Lights on Mercedes C
Replacing License Plate Lights on Mercedes C
Mercedes Classe C (2000-2007 / W203) How to replace the license plate bulbs on a Mercedes C? Here’s how to remove the light assembly and change the bulbs. Remove the securing screws on t…
How to Replace the License Plate Bulbs on a Mercedes C-Class
How to Replace the License Plate Bulbs on a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. replace the license plate bulbs on a Mercedes C-Class? Open the trunk hood; use a screwdriver or pry tool to remove the plastic cover on the inside of.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos