Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

License Plate Bulb Replacement on Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: License plate light

See other generations:
Video tutorial

To replace the license plate light on a Mercedes C-Class, first lift the trunk lid and remove the four T20 Torx screws. Next, detach the various retaining clips as shown in the video, using a medium-small flathead screwdriver.

Once this is done, you can pull out the central plastic piece and disconnect its connector. Release all the other retaining clips and remove the housing containing the license plate bulb.

Extract and replace the bulb, then reassemble everything in reverse order.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to Replace the License Plate Bulb on a Mercedes C-Class?
How to Replace the License Plate Bulb on a Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. replace the license plate bulb on the Mercedes C-Class, open the trunk to access the rivets securing the inner trim. Once all rivets are removed, detach.. …
How to Replace the License Plate Bulb on a Mercedes-Benz C-Class?
How to Replace the License Plate Bulb on a Mercedes-Benz C-Class?
Mercedes Classe C (2007-2013 / W204) .. the license plate bulb on a Mercedes-Benz C-Class, loosen the screws located next to the two light assemblies containing the license plate bulbs... …
How to Replace the License Plate Bulbs on a Mercedes C-Class
How to Replace the License Plate Bulbs on a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. replace the license plate bulbs on a Mercedes C-Class? Open the trunk hood; use a screwdriver or pry tool to remove the plastic cover on the inside of.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos