Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of license plate bulbs for Mercedes C-Class

Model: Mercedes Classe C W204 - Years 2007-2013
Part: License plate light

Below we will see the instructions that will allow us to disassemble and replace the license plate lights of the Mercedes C-Class. First of all, we open the rear door of the trunk and start unscrewing the screws of the plastic cover of the lights; then we remove the lining of the rear door, as shown in the video. At this point, we disconnect the electrical connectors of the lights to remove and replace the license plate bulbs from the outside; we install the suitable lights, with the same attachment, reassembling the plastic cover and the lining of the rear door!

Posted on 20 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to install a rearview camera on a Mercedes C-Class vehicle
How to install a rearview camera on a Mercedes C-Class vehicle
Mercedes Classe C (2007-2013 / W204) .. install a rearview camera on a 2008 Mercedes C-Class. We start the installation by removing the trunk door panel to access the license plate lights... …
Replacing the Timing Chain on the Mercedes C-Class 300
Replacing the Timing Chain on the Mercedes C-Class 300
Mercedes Classe C (2014-2021 / W205) .. and replace the timing chain on the Mercedes C-Class 300. To remove the timing chain, you need to take off the valve cover, then remove the timing chain.. …
Replacement of the starter motor of the Mercedes C-Class 300 (3.0 V6)
Replacement of the starter motor of the Mercedes C-Class 300 (3.0 V6)
Mercedes Classe C (2007-2013 / W204) .. replacing the starter motor of the Mercedes C-Class 300 (3.0 V6). First, it will be necessary to lift the vehicle in order to access the starter motor;.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos