Do it yourself
| ||||
|
Mercedes Classe C - Video tutorial
Model: Mercedes Classe C
W205
- Years 2014-2021 To reset the AdBlue of the 2017 Mercedes C-Class, we need to insert the cable inside the OBD port to connect the PC for diagnosing the vehicle. Once the diagnosis is done, the error will be shown and then select the first option. From the diagnosis, it was found that the problem occurred due to a malfunction in the current. So, we lift the car and disconnect the sensor from its housing, just as shown in the video. Clean the sensor and let it soak in WD-40 for 5 hours. Reassemble the sensor and then move inside the vehicle and insert the diagnostic computer to check if the reset has been done thanks to the replacement part.
Posted on 3 April 2024 by ScegliAuto
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.016
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |