Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of the Mercedes E-Class

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Rear bumper

See other generations:
Video tutorial

If you need to perform a repair on the rear bumper, it is always better to remove it and work comfortably on jack stands rather than on the vehicle; painting will also yield better results: it actually takes less time to remove the bumper than to mask the rest of the vehicle; that said, start by opening the trunk to remove the plastic trim piece known as the bumper cover; at this point, you can access the internal mounting pins of the bumper, then move on to those along the edges of the fender and finally to those underneath the bumper itself; complete the process by disconnecting the side edge.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

Removing Front Bumper on Mercedes E-Class
Removing Front Bumper on Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) Do you want to replace the front bumper on your Mercedes E because it's damaged? Here's how to remove it. Lift the hood and secure it, then raise the…
How to remove the rear bumper of the Mercedes E-Class
How to remove the rear bumper of the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. and replace the rear bumper of the Mercedes E-Class. First, open the trunk lid and start removing all the plastic clips found above and below the bumper;.. …
How to disassemble and replace the front bumper grille of the Mercedes E-Class
How to disassemble and replace the front bumper grille of the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. the front bumper grille of the Mercedes E-Class. First of all, we open the hood of the car and start disconnecting the air intake hose; then we.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos