|
Do it yourself
| |||
| ||||
Resetting the On-Board Computer for Next Service Indicator
Model: Mercedes Sprinter
MK 2, W906
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Video tutorial
To reset the distance indicator on the on-board computer for the next maintenance service, perform the following steps. Turn the ignition key to the start position to power on the instrument panel. Press and hold the button marked "0" located on the right side of the speedometer until you hear a beep. Once you hear the beep, release the button and press the button marked "M" several times until the display shows "reset" and the number 51. Press and hold the "0" button until the number 2 appears, then press "0" again until the display shows "reset done". Turn the key to the off position and then turn on the instrument panel to check that the indicator shows 00.
Updated on 2 February 2026 by ScegliAuto
Related tutorials
Mercedes Sprinter
(2006-2018 /
MK 2, W906)
The service light is a warning related to the vehicle's routine maintenance, specifically referring to the service interval. You will proceed to chan…
Mercedes Sprinter
(2006-2018 /
MK 2, W906)
Learn how to reset the oil service maintenance indicator on a Mercedes Sprinter. This operation is very simple: enter the vehicle, turn on the igniti…
Mercedes Sprinter
(2018-2026 /
Br907, Br910, MK 3)
In today's article, we will explain the procedure for resetting the service light on the Mercedes Sprinter. This procedure takes little time to compl…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.066
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
