Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Sprinter
    4. : How to replace the battery in the key remote of the Mercedes Sprinter

Mercedes Sprinter - Video tutorial

Model: Mercedes Sprinter MK 1, W901 - Years 1995-2006
Part: Battery
Operation: How to replace the battery in the key remote of the Mercedes Sprinter

Today's guide will show us how to disassemble and replace the battery of the Mercedes Sprinter key remote, in simple steps. First, we take our remote and start by unhooking and removing the plastic back cover, leveraging the sides with something thin; underneath we will find the battery, which we will remove, as shown in the video. At this point, we install the new suitable battery (in this case a CR 2025 3V); insert it into the battery compartment in the correct direction, finally fixing the square plastic cover of the remote!


Posted on 2 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Sprinter 2018-2030 - Where is the Mercedes Sprinter battery located? Read Answer
    • Sprinter 2018-2030 - Where is the Mercedes Sprinter battery located? Read Answer
    • Sprinter 2006-2018 - Where is the Mercedes Sprinter battery located? Read Answer
    • Sprinter 2018-2030 - Where is the Mercedes Sprinter battery located? Read Answer
    • Sprinter 2018-2030 - Where is the battery located in the Mercedes Sprinter? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos