Do it yourself
Frequently asked questions about cars and motorcycles

How to dismantle the bumper of the Mercedes A-Class

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Rear bumper

In this article, with the support of the video, we will see how to replace the rear bumper of the Mercedes A-Class. To remove the bumper, you need to lift the car using a lift or a jack, after lifting the car you need to first remove the fixing clips of the bumper located in the wheel arches of the rear wheels, once the clips are removed from both wheel arches you need to remove the fixing bolts located on the rear underneath the bumper, once removed you can then remove the bumper and proceed with its replacement.

Posted on 4 May 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

Mercedes Classe A (2018-2026 / W177) .. you begin, lift the front of your Mercedes A-Class. Start by disconnecting and removing the clips securing the rear bumper. Next, unscrew and remove.. …
Mercedes Classe A (2012-2018 / W176) .. the front bumper grille on a Mercedes-Benz A-Class, following the instructions below. First, open the hood of the vehicle and start removing the front.. …
Mercedes Classe A (2012-2018 / W176) .. how to remove the front bumper from a Mercedes A-Class W176. First, open the hood and disconnect the two battery terminals. Next, remove the screws located.. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos