Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Door Panel to Replace Lock

Model: Mercedes Classe E W210 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Door trim panel

See other generations:
This video is currently unavailable

Using a plastic tool to avoid damaging the body, remove the covers over the screws and the plastic trim around the opening handle. Unscrew the panel screws and, using the plastic tool, pry around the panel to release the clips.

Gently remove the protective trim above the panel by prying between the plastic and the body. Once released, lift the entire panel upward and remove it. Before complete removal, disconnect the opening mechanism and the electrical connections.

Remove the plastic clips holding the handle cover on the panel and take it off.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Door Cable and Lock on the Mercedes E-Class
Guide to Replacing the Door Cable and Lock on the Mercedes E-Class
Mercedes Classe E (1995-2002 / W210) Today's guide will show you the key information needed to disassemble and replace the cable and lock of the front door on the Mercedes E-Class. First…
Removing the Front Speaker
Removing the Front Speaker
Mercedes Classe E (2002-2009 / W211) To remove the front speaker, first take off the door panel: start by removing the plastic covering the lock area, then move to the section at the fro…
Removing the Power Window Motor
Removing the Power Window Motor
Mercedes Classe E (2002-2009 / W211) To remove the power window motor, first remove the door panel: take off the plastic cover applied to the lock, the cap located at the front of the pa…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos