Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Door Cable and Lock on the Mercedes E-Class

Model: Mercedes Classe E W210 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Door lock

See other generations:
Video tutorial

Today's guide will show you the key information needed to disassemble and replace the cable and lock of the front door on the Mercedes E-Class. First, open the front door and start removing the door panel by taking off the plastic covers and unscrewing all the fastening screws.

Then, unscrew the screws for the door lock, disconnecting the cable to remove it, as shown in the video. At this point, replace or repair any damaged components, applying the reverse procedure for reassembly!


Updated on 26 October 2026 by ScegliAuto


Related tutorials

How to Replace the Exterior Door Handle on the Mercedes E-Class
How to Replace the Exterior Door Handle on the Mercedes E-Class
Mercedes Classe E (1995-2002 / W210) .. the exterior door handle on the Mercedes E-Class. First, open the vehicle's door and start unscrewing the side screws to remove the lock cylinder,.. …
How to Replace the Rear Door Panel on a Mercedes E-Class?
How to Replace the Rear Door Panel on a Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) .. to replace the rear door panel on a Mercedes E-Class, a very simple operation. First, go inside the cabin, then remove the lower cover, unscrew the.. …
How to Replace the Door Lock Actuator on a Mercedes E-Class?
How to Replace the Door Lock Actuator on a Mercedes E-Class?
Mercedes Classe E (1995-2002 / W210) .. replace the door lock actuator on a Mercedes E-Class, loosen all the screws that secure the door panel to its housing: once all these screws are loosened,.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos