Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the glove box lock of the Mercedes E-Class

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Door lock

In this guide we will see step by step instructions on how to disassemble and replace the lock of the glove compartment of the Mercedes E-Class. First, get into the car and start by removing the plastic cover above the glove compartment; then unscrew the fixing screws inside, using a screwdriver or a Torx T20 key, as shown in the video. At this point, disconnect the electrical connector of the bulb in the compartment to remove the glove compartment, then proceed with the disassembly of the lock; replace it with the new one, also replacing the key accordingly.

Posted on 17 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe E (2002-2009 / W211) .. and replace the handle sensor of the Mercedes E-Class, an operation to perform if the lock of that specific door shows signs of malfunction. First, move.. …
Mercedes Classe E (2009-2016 / W212) .. new guide for all of you who own a Mercedes E-Class W212, discover where the fuse box is located in your vehicle. Before proceeding, remember that.. …
Mercedes Classe E (1995-2002 / W210) .. replace the door lock actuator on a Mercedes E-Class, loosen all the screws that secure the door panel to its housing: once all these screws are loosened,.. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos