Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How do you replace the door lock of the Mercedes E-Class?

Model: Mercedes Classe E W210 - Years 1995-2002
Part: Lock

In order to replace the door actuator of the Mercedes E-Class, you need to loosen all the screws that secure the door panel to its housing. Once all these screws have been loosened, it will be possible to remove the panel and access the underlying components. On the left side of the door, you will be able to locate the lock actuator, which needs to be removed from its housing by unscrewing the fixing screws and disconnecting the corresponding connectors. This way, you will be able to connect the new actuator and secure it with screws, then cover everything with the door panel.


Posted on 18 September 2023 by ScegliAuto



Guide to replacing the cable and door lock of the Mercedes E-Class.
Mercedes Classe E (1995-2002 / W210) .. door lock of the front door of the Mercedes E-Class. First, we open the front door and begin to disassemble and remove the door panel, removing the..
How do you remove the exterior handle of the Mercedes E-Class?
Mercedes Classe E (2016-2023 / W213) .. to remove the external handle of the Mercedes E-Class you have to open the door to remove the rubber on the side of the door itself. Under it there will..
How to remove the central lock (right side) on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. the central lock (right side) on a Mercedes E-Class? Before starting, disconnect the battery terminals in the engine compartment. With a lever we remove..

Other guides that may interest you

How to remove the telepass holder from the windshield

Today we will explain how to remove the telepass holder from a vehicle's windshield. Removing the telepass holder from the windshield is a very simple and quick operation to perform independently, you just need to use nylon thread that you will need to pull towards the holder and pass it between the holder and the clip. After performing this operation, the holder will be removed. There may be glue residues on the windshield that can be removed with a solvent suitable for glass cleaning. After cleaning everything, it is possible to mount another telepass holder on the windshield in the same position as the one removed or elsewhere.

Watch the video!


by ScegliAuto

More videos