Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Mercedes-Benz C-Class?

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on a Mercedes-Benz C-Class, turn on the ignition by turning the key in the ignition switch. Once the dashboard lights up, navigate through the menu using the directional controls on the left side of the steering wheel until the icon with the wrenches appears.

At this point, press and hold the button located on the left side of the dashboard until the light disappears completely. After completing the procedure, you can turn off the ignition.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) .. To reset the Service light on a Mercedes C-Class, turn the key to the ON position to activate the instrument cluster. Then, press and hold the OK.. …
Mercedes Classe C (2007-2013 / W204) .. To reset the Service light on a Mercedes C-Class, turn the key to the "On" position to activate the instrument cluster. Then, press and hold the.. …
Mercedes Classe C (2007-2013 / W204) .. On the Mercedes C-Class, reset the Service light by turning the key to the "On" position. Then, press and hold the OK button.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos