Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Cabin Air Filter in the Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Cabin air filter

See other generations:
Video tutorial

To ensure a steady flow of clean air in the climate control system of the Mercedes C-Class, replace the dedicated filter according to the maintenance schedule set by the manufacturer. Open the hood, and you will find the filter box on the driver's side, near the firewall.

Disconnect the clips that secure the cover, remove it, and take out the old filter. Clean the internal surfaces with a vacuum, install a new filter element, preferably using activated carbon filters for better filtration, close the cover, and secure it with the clips.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) .. Replacing the air filter on a Mercedes C-Class? Here’s how to do it. The cabin air filter is located at the bottom right of the glove compartment. G.. …
Mercedes Classe C (2014-2021 / W205) .. Replacing the cabin air filter on a Mercedes C-Class? Let's see how to remove it. Open the hood, use a lever to remove the plastic cover on the left.. …
Mercedes Classe C (1993-2000 / W202) .. replace the cabin air filter on the Mercedes C-Class. First, get in the vehicle on the passenger side and start by removing the rectangular plastic.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos