Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to release the spare wheel in the MG Gloster?

Model: MG Gloster MK 1 - Years 2017-2024
Part: Wheel

In this tutorial we can see how to release the spare wheel in the MG Gloster, positioned under the vehicle, useful in case we need it following a puncture, for example. First of all we open the tailgate and lift the bottom panel. In the same compartment where the tools are placed, we will notice a black plastic cap, remove it and insert the special supplied key inside the hole. At this point we just have to unscrew the bolt until the wheel is completely released, which will be released from the rope. Finally we screw the bolt back in order to bring the hook into position.

Posted on 25 March 2022 by ScegliAuto

Video tutorial

Related tutorials

Where is the spare wheel on the MG Gloster?
Where is the spare wheel on the MG Gloster?
MG Gloster (2017-2024 / MK 1) In order to get the spare wheel of the MG Gloster you have to go to open the tailgate of the car, so that you go to raise the carpet located at the b…
How is the MG Gloster Infotainment system used?
How is the MG Gloster Infotainment system used?
MG Gloster (2017-2024 / MK 1) In order to use the Infotainment system of the MG Gloster, you have to insert the ignition key in the lock, turning it to turn on the instrument pane…
How does Android Auto work in the MG Gloster?
How does Android Auto work in the MG Gloster?
MG Gloster (2017-2024 / MK 1) In the following video, we will see how it is possible to connect Android Auto to the smartphone in the MG Gloster. This application is very useful a…

Other guides you may be interested in

How to Replace the Lift Supports on a Porsche 911

How to remove and replace the lift supports for the hood on a Porsche 911? Let's see how to replace them in this video: Lift the hood and secure it. Use a screwdriver or metal lever to detach the clips that hold the lift support at both ends (or unscrew the mounting pins). Install the new part onto the sheet metal of the front trunk, securing the lift support with the clips/pins. Proceed in the same manner for the removal/installation of the opposite lift support. Finally, test the gas springs installed earlier.

Watch the video!


by ScegliAuto

More videos