Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. Gloster
    4. : Where is the spare wheel on the MG Gloster?

MG Gloster - Video tutorial

Model: MG Gloster MK 1 - Years 2017-2024
Part: Wheel
Operation: Where is the spare wheel on the MG Gloster?

In order to get the spare wheel of the MG Gloster you have to go to open the tailgate of the car, so that you go to raise the carpet located at the base of the trunk. Once this has been raised, it will be possible to locate the key under it which will be used to lower the spare wheel from the lower floor of the car. It will be necessary to completely unscrew the screw located in the boot, until the wheel comes off the floor. Once the wheel has been detached, it will be possible to use it to replace one of the wheels on the vehicle.


Posted on 13 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos