Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. MG
  4. :
  5. Gloster
  6. : How do you use the on-board computer of the MG Gloster?

MG Gloster - Video tutorial

Model: MG Gloster MK 1 - Years 2017-2024
Part: Instrument cluster
Operation: How do you use the on-board computer of the MG Gloster?

In order to use the MG Gloster's on-board computer, the ignition key must obviously be inserted into its lock, so that the instrument panel turns on. Once this has been turned on, it will be possible to scroll through the various menu screens using the controls located on the left spoke of the steering wheel. Thanks to the on-board computer it will be possible to read the maintenance intervals, the remaining range, the average fuel consumption, etc. It will also be possible to establish bluetooth connections with external devices, answering calls and playing multimedia contents.


Posted on 1 May 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos