Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure system on the MG4

Model: MG MG 4 MK 1 - Years 2022-2026
Part: Instrument cluster

In this video we can see how to reset the tire pressure on the MG4: on the screen we see the tire pressure warning, and the car also gives us an audible alert to let us know that a tire needs our attention. We can determine which tire it is by using the menu button, located on the right side of the steering wheel, and scrolling until we see the outline of the car, which will show us in yellow the outline of the deflated tire, in this case the rear left. We refer to the correct tire pressure on the label mounted on the driver's side pillar, although it seems to be more of a problem with a sensor that is too sensitive. However, the YouTuber adjusts the pressure by increasing it slightly higher than the previously detected pressure.

Posted on 3 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you turn off an electric MG4?
How do you turn off an electric MG4?
MG MG 4 (2022-2026 / MK 1) In this video we see the procedure for turning off an electric MG4: bring the vehicle to a stop, making sure to be in "P" (parking) mode and fully br…
How to Activate the Cruise Control on the MG4
How to Activate the Cruise Control on the MG4
MG MG 4 (2022-2026 / MK 1) Today, we will see how to activate the Cruise Control system on the MG 4. From the settings menu, press the "CRUISE CONTROL" button and use the arrow…
How to Reprogram the Tyre Pressure Sensors on the MG 4
How to Reprogram the Tyre Pressure Sensors on the MG 4
MG MG 4 (2022-2026 / MK 1) These brief and simple steps will show you how to reprogram the tyre pressure light on the MG 4. To program the TPMS sensors, you need to use a speci…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos