Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the MG 5 with a Dead Remote Battery

Model: MG 5 Ap12 - Years 2012-2018
Part: Key

Let's discover in this brief and simple guide how to open the doors of the MG 5 in case of emergency with a dead remote battery. First, take your remote and start by removing the small plastic cap located on the right side of the handle, prying it off using the small slot underneath the cover. Once removed, use the physical key from the remote to unlock the vehicle by turning the lock cylinder to the right, as shown in the video. Then, replace the remote battery!

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

The key for the remote control battery of the MG 5, how is it replaced?
The key for the remote control battery of the MG 5, how is it replaced?
MG 5 (2020-2026 / MK 2) Is the battery of our MG 5 key dead? No worries, we can replace it ourselves in no time, without needing to go to a service center and without spendi…
How to replace the battery of the MG5 remote control
How to replace the battery of the MG5 remote control
MG 5 (2012-2018 / Ap12) In this video we can see how to change the battery of an MG 5 remote control: It will be enough to pry in the lower part of the shell, with something…
How to Replace the Battery in the MG 5?
How to Replace the Battery in the MG 5?
MG 5 (2012-2018 / Ap12) To replace the battery in the MG 5, open the hood to access the components in the engine compartment: the battery is located at the front, near the l…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos