Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the MG 5 dashboard plastics

Model: MG 5 Ap12 - Years 2012-2018
Part: Dashboard

Let's find out in this guide how to disassemble and replace the central plastics of the MG 5 dashboard, following the instructions below. First of all we get on board the car and start removing the plastic located above the multimedia system; to do this we pry the sides with something thin, also removing the central air vents, as shown in the video. At this point we remove the car radio cover and the dashboard plastics; if necessary, we also remove the car radio. Then let's reassemble everything, applying the reverse procedure!

Posted on 18 August 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the MG5 remote control
How to replace the battery of the MG5 remote control
MG 5 (2012-2018 / Ap12) In this video we can see how to change the battery of an MG 5 remote control: It will be enough to pry in the lower part of the shell, with something…
How to remove the rear seat of the MG 5
How to remove the rear seat of the MG 5
MG 5 (2012-2018 / Ap12) Let's see in this short guide how to remove and replace the rear seats of the MG 5, following the instructions below. First of all, we open the rear …
What is the fuse diagram for the MG MG5 EV?
What is the fuse diagram for the MG MG5 EV?
MG 5 (2020-2026 / MK 2) If some devices of our MG MG5 EV have suddenly stopped working, we can first of all check the status of the related fuses, whose diagrams are indicat…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos