Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Microcar Mgo

Model: MG MG Various
Part: Service warning light

Today, discover how to reset the service light for the routine maintenance oil change on the Microcar Mgo by following the instructions below. First, get inside the vehicle and ensure all doors are closed; then, turn on the instrument panel by pressing the button near the gear lever, and press and hold the button on the instrument panel to reset the oil change maintenance light, as shown in the video. Finally, turn off the panel and start the engine!

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the MG 6?
How to Reset the Service Light on the MG 6?
MG MG Various This tutorial shows how to reset the service light on the MG 6, a very simple and quick operation to perform only after completing all scheduled main…
How to Reset the Service Light in a MG GS
How to Reset the Service Light in a MG GS
MG MG Various In this tutorial, you will see how to reset the service light in the MG GS, a very simple and quick operation to perform only after completing all re…
How to reset the AdBlue warning light in an MG?
How to reset the AdBlue warning light in an MG?
MG MG Various If the AdBlue warning light has turned on in the instrument panel of our MG, it means that the pollution control system liquid has reached the minimu…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos