Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the time in the MG 350?

Model: MG MG Various
Part: Clock

In this tutorial we can see how to set the time in the MG 350, a very simple and fast operation, to be performed after being left with the battery flat or following the transition to winter and summer time. First of all, turn on the instrument panel, then repeatedly press the "Info" button until the time appears on the display. Subsequently, press the "Enter" key and proceed with the change of the hour, according to need, by turning and pressing the knob located in the center of the console. To save the setting, simply go back to the main screen.

Posted on 17 November 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the MG 350 - Roewe 350.
How to replace the cabin air filter of the MG 350 - Roewe 350.
MG MG Various Let's take a look at the necessary instructions for disassembling and replacing the cabin air filter on the MG 350 and Roewe 350 in this short and si…
How to set the ambient lighting on the MG HS?
How to set the ambient lighting on the MG HS?
MG MG Various In this video, we see how to customize the ambient lights in our MG HS. We need to click on the car icon, then go to the comfort section, where we wi…
How to replace low beam bulbs in MG ZR?
How to replace low beam bulbs in MG ZR?
MG MG Various As we can see in this tutorial, replacing the headlight bulbs in your MG ZR is a very simple operation. Before proceeding, let's make sure that the k…

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos