Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. ZS
    4. : How to remove the interior rearview mirror of the MG ZS.

MG ZS - Video tutorial

Model: MG ZS Zs11 - Years 2017-2024
Part: Interior rearview mirror
Operation: How to remove the interior rearview mirror of the MG ZS.

Today we will see, in this short and simple guide, how to disassemble and replace the interior rearview mirror of the MG ZS, following the instructions below. First of all, we get into the car and begin to discover the method of removing the mirror; to remove it, simply grasp it with both hands and pull it forward, in order to detach it from the windshield support, as shown in the video. At this point, if necessary, we also remove the mirror support; then we proceed to install the new one, applying the reverse procedure!


Posted on 14 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos