Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the Mg 5 Zs battery.

Model: MG ZS Zs11 - Years 2017-2024
Part: Battery

If we want to replace the battery on this car model, in the description we have provided below we will find the details and operations to perform a safe replacement. Once the engine hood is opened, the battery is located on the left side. Therefore, proceed to disconnect the negative pole first and then the positive one, and remove the fixing plate at the base. Remove the battery from the engine compartment and replace it with the new one, then connect the positive pole first and then the negative one, and finally reattach the lower plate.

Posted on 15 May 2023 by ScegliAuto

Video tutorial

Related tutorials

How to change key battery on Mg Zs
How to change key battery on Mg Zs
MG ZS (2017-2024 / Zs11) Do we want to proceed with replacing the remote control key battery on this type of car? First you need to buy a new battery, then take a screwdriver…
How to replace the battery of the MG ZS remote control?
How to replace the battery of the MG ZS remote control?
MG ZS (2017-2024 / Zs11) In this tutorial, we can see how to replace the battery of the MG ZS remote control, an extremely simple and quick operation. To do this, we will onl…
How to change the key battery on the Mg Zs.
How to change the key battery on the Mg Zs.
MG ZS (2017-2024 / Zs11) If we have noticed that the remote control key's battery has run out and we want to proceed with replacing it ourselves, in the description below we …

Other guides you may be interested in

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos