Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Windshield Wiper Blades on a MG ZS

Model: MG ZS Zs11 - Years 2017-2024
Part: Windshield wipers

Do you want to replace the windshield wiper blades yourself on this car model? Below are all the useful instructions for a DIY replacement. First, lift the arm away from the windshield and press to release the lock that holds the blade. This way, by rotating the blade 90 degrees, you can remove it from the pivot on the arm. Next, take the new blade and position it on the arm, securing it by pressing the upper lock. Then, repeat the same procedure to change the other blade.

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

MG ZS (2017-2024 / Zs11) To replace the windshield wiper blades on the MG ZS, lift the arms to which the blades are attached so that they do not contact the windshield. Once …
MG ZS (2017-2024 / Zs11) Let's see how to set the service mode for the MG ZS wipers so you can lift the blades off the windshield for replacement or cleaning: turn on the ign…
MG ZS (2017-2024 / Zs11) In this video, we will see some utilities for the MG ZS: for example, if you find yourself with a dead battery, you can remove the end part of the ha…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos