Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the MG ZS Wipers in Service Position

Model: MG ZS Zs11 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Windshield wipers

See other generations:
Video tutorial

In this video, learn how to position the wipers of the MG ZS in service position: for Keyless models, turn on the ignition by pressing the button twice and turn it off immediately after. Within 20 seconds, pull down the wiper lever: the wipers will lift to a vertical position.

To reset them, simply turn on the ignition normally. For vehicles with a physical key: insert the key, turn it to the "ON" position, then turn it off and remove the key: within 20 seconds, pull down the wiper lever to lift them for maintenance.

As with the keyless models, just restart the vehicle to reposition them.


Posted on 12 March 2026 by ScegliAuto


Related tutorials

How to Set the MG ZS Wipers to Service Mode
How to Set the MG ZS Wipers to Service Mode
MG ZS (2017-2024 / Zs11) Let's see how to set the service mode for the MG ZS wipers so you can lift the blades off the windshield for replacement or cleaning: turn on the ign…
Service reset on a MG ZS
Service reset on a MG ZS
MG ZS (2017-2024 / Zs11) In this very useful guide, we are shown how to perform a service reset using the right steering wheel keypad on an MG ZS, a model produced from 2017 …
How to Replace the Windshield Wiper Blades on a MG ZS
How to Replace the Windshield Wiper Blades on a MG ZS
MG ZS (2017-2024 / Zs11) Do you want to replace the windshield wiper blades yourself on this car model? Below are all the useful instructions for a DIY replacement. First, li…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos